Sia - Cheap Thrills (Lyric Video) ft. Sean Paul
Super Diamond Clear SUPER DIAMOND CLEAR is a solvent based curing and sealing compound specially designed to cure new concrete, assuring proper cement hydration and strength gain, while providing a non-yellowing seal to protect and enhance the appearance of concrete.
The overall look and colors were enhanced well.
Gloss Level: 8 — Super Diamond clear contains 25% solids according to the manufacturer.
This sealer left a nice semi-gloss shine to the stamped concrete patio.
We did notice that the Diamond Clear looked stunning when dried.
There was not visible wearing or peeling.
It did not turn white completely but it definitely left a light white look to the sealer and patio.
Overall Score Super Diamond Clear at 2 Year Period: 7.
We were very impressed with the appearance after application and it did seem to hold up fairly well through the years.
Not a bad sealer but not the best either.
Product Information: Where To Buy Online: Sealer Type: Semi-Gloss Solvent-Based Acrylic Types of Substrates: Pavers, Stamped Concrete, Exposed Aggregate, Decorative Concrete Coats Required: 1 coat or 2 thin coats for a higher gloss.
Coverage Per Gallon: 100-125 sq.
We offer no guarantee of similar results.
Take inconsideration that results may differ due to different surface types, exposure to UV radiation, and traffic.
For the Diamond Clear?
Prep and reapply as needed every 2 years.
If the sealer turns white as it can do, strip all off and start over.
I applied the "thin" coat I was told over and over to do at the concrete supply around here.
Unless I went too thin, but Super diamond clear vox won't use this again.
I love this product.
We have a colored concrete driveway and a darker stamped sidewalk.
We have used this product for the last 11 years.
We re-do it every other summer.
We have NEVER has any issues with it.
If it yellowed or cracked it was probably not applied correctly.
Do not apply it too thick or else it will peel or flake off.
We do take the time to prepare the surface.
Acid wash to get off anything so there won't be any issues.
Also if you do it in hot weather it won't last.
I must respectfully disagree with the reviewer.
The contractor who poured my stamped concrete patio applied Super Diamond Clear sealer to it.
It probably did help with the curing as I have no cracks, HOWEVER~ 2 years later, this product did yellow horribly and develop a nasty white haze.
If I had to guess, I would say it was 50-60% transparent, but like looking through very cloudy amber.
In other words, I could see about 50% of the original color through the white yellowy haze.
It looked like my patio had cataracts.
It is a messy nightmare to remove it … Read more » Beware do not use this product.
Gave it a second chance.
It turned my beautiful red Arizona stamped concrete patio into a milky white mess.
Followed instructions to a tee.
Results both times the same.
Ewwwwwwww i am sealing an area around a saltwater pool approximately 1100 sq ft.
I put on super diamond clearfirst coat looked great put on second coat with shark gripnow you can see every roller markwent over thin third coat still no difference in lookany way to fix this were roller lines will not show?
I split some Euclid super diamond sealer in the back of my car on the carpet.
Any thoughts on how to get it out?
Will the smell fade?
Any suggestions greatly appreciated!
Decorative stamped concrete poured and seal with euclid super diamond clear May 2014 green, white,black can Then it was resealed May 2016 with euclid super diamond clear white can.
After about two month decorative stamped concrete appeared with a white haze.
I called the guy who did the second coat and he stated to try a treatment of xylene.
After 1st initial try with xylene it seems to work, but after a few weeks same white haze appeared.
So I tried 2nd treatment of xylene with same results.
Yesterday I ran into the guy who resealed it now he … Read more » You cannot fix this by adding more sealer of any brand on top of the white haze.
Need to strip it all off and start over.
Diamond Clear is a solid acrylic sealer.
It is not breathable and can be prone to the white haze.
We suggest the Super Seal 25 or Super Seal 30.
These are breathable styrene acrylics that are not prone to the white haze issues of solid acrylics.
Like I mentioned previously, you cannot fix your issue though by adding a better sealer on top.
You need to remove and start over.
How to exactly remove and start over?
Could i try using the xylene and pressure washing after?
Or do I find a sealer stripper and pressure wash the surface?
I'm not sure what sealer stripper to use that does not come in a 5 gallon can!
Thanks for your help.
I'm guessing the concrete guy who I used doesnt know much about the sealer.
Xylene will not strip it.
You will need a sealer stripper.
We use the Clemons Concrete Sealer Stripper and heavy pressure washing to remove.
Where can I find this?
Does it come in a container less that an 5 gallons?
I've seen some at Lowes that said can be used on concrete for acrylicbut was not sure about it?
I'm waiting to hear back from Clemsons to tell me where can I find there product for sale.
Seems like everything I see is a 5 gallon bucket.
Is Clemson the only one you recommend?
Or can you tell me another one similar to use?
We have tried others but the Clemons seem to always work.
Make sure you have a good pressure washer to remove after applying.
Never tried the Glaze n Seal stripper so unsure about how effective it is.
Did I make a mistake in going with the Clemons Supreme Shield SB-600 over the Super Seal 25 or 30?
I decided I wanted a wet look instead of a gloss.
I just received my order today.
My plan is to strip the sealer 1st with the clemons then apply sealer a few days later.
What would be the name of the degreaser?
I've done some stripping and still some white afternit has dried.
I'm not sure if I need to strip it again.
We use Clemons Cleaner Degreaser but any brand should work.
It does not remove old sealer if that is still there.
visit web page there anyway I can upload a picture on here to show my results?
I'm not sure if I need to strip the section again or use a degreaser?
Order the Clemons stripper and decided to go with the Clemons Supreme Shield SB 600.
I decided to go with the wet look.
I'm looking forward to seeing no white haze!
Hi, I just applied an acid stain to my concrete basement floor and looking to finish it off with a sealer.
After investing so much time on the stain I really want to find a sealer super diamond clear vox makes the color pop and give me a nice wet look.
Since it's indoors I have super diamond clear vox use a water base product.
In the review above you say that Super Diamond clear is not the best sealer.
Can you recommend a better sealer for my use case?
What about Super Diamond Clear VOX.
Have you used this product?
The product brochure says it's non-yellowing and 25% solids.
Would you choose the Masonry Saver over the Super Diamond VOX in terms of wet look?
Thanks I have been sealing my patio with Super Diamond Clear.
This past April it didn't take so well.
I think i might have applied it too thick.
How much time needs to pass before applying another coat?
Most likely you need to strip and start over.
It does not just go away and adding more later one will compound the issue of build up and too many coats.
I have used this product for many years.
Every year requires another application because the exposed aggregate surface becomes discolored as though a light coating of light brownish mud covers the entire surface that was coated with Super Diamond Clear.
From my experience using Diamond Super diamond clear vox at my home, many years ago, I can attest to the fact that the Diamond Coat back then did not turn to … Read more » Okay so I'm in a terrible situation with this product.
I took a job to reseal a pool deck.
Sprayed the surface with xzylene and rolled the sealer on.
I did wait until the slab was completely dry before I applied.
While the sealer was still wet the homeowners lawn maintenance guys mowed the yard and got grass all over the fresh seal.
The homeowner used a blower on it to try and get all of the grass out and after hours of that and also picking it out the seal turned white in a few spots … Read more » Will rain impact sealant drying if applied to pavers for just over an hour?
Was told it took several hours for second coat to dry.
I would like to seal my pavers with a matte finish.
What is the best product to use.
Can I roller it on?
Thanks for your help.
We were sold Euclid super diamond clear vox clear 350 which turned dark we were supposed to have clear.
How can we either remove or at least lighten our concret driveway?
It is normal to darken the color with these products.
To remove you will need a concrete sealer stripper and a pressure washer.
We use the Clemons Concrete Sealer Stripper.
It almost looks as if the areas of high foot traffic did not take the sealer or it did not make the colors pop.
I have only put one coat on the patio.
I would love to get some advice on how to get the color back jn those areas?
Most likely it is the stamped concrete itself that is causing this, not the sealer.
Not sure if it can be fixed.
Might want to contact a local pro who can look at the project for some advice.
Have used it with a brush every year since 2007 on my stamped patio.
No fading on discoloration.
But it does NOT last more than a year.
I would give it an 8.
Would consider a rival product if it would last longer.
It was sealed with Super Diamond Clear and seems to have held up pretty well.
However, it is on the south side of the house and gets full sun all day long.
I was going to reseal it again this fall just to keep it looking its best.
If I want to switch from Super Diamond Clear to SuperSeal 25 or SuperSeal 30 this time around, do I need to do anything special to prep the patio, or is a good pressure washing sufficient?
Also, is … Read more » The 30 is a little shinier then the 25.
Just make sure the surface is clean and that the Diamond clear has not discolored.
I have 1500 sq ft of stamped concrete.
I have been coating yearly with super diamond clear for 7 yrs.
Good results but have to do it every year.
It has been over a week and still has a "horrible, strong, nasty " oder.
If a pillow or towel is on the floor, it picks up the floor smell.
It's been a major disappointment with this product.
The finish scuffs and marks easily.
Any suggestions on how to elimante the smell and how to deal with the scuffs and scratches?
Ddi you use this inside?
You should not have due to the odor.
It will have to go away naturally.
Not sure on the scratches.
I applied it on a hot day around 11:00 am in brite sunshine.
The patio was very hot.
The sealer didn't bubble right away but the next morning almost the entire 950 sq ft patio was full of small blister bubbles.
What can I do to fix the patio now?
Apply on a cloudy day late in the evening.
Spray down the patio with xylene to melt the bubbles.
Do not apply this in direct sunlight to avoid it repeating again.
You can try the xylene.
Make sure to not apply in direct sunlight.
Later in the day before sun goes down.
Guys staining deck above exposed aggregate concrete dripped stain on the patio.
The patio is sealed with super diamond clear and they tried to clean it up by using paint thinner and a wire brush…now I have patches that are a dull white color in several places on my patio.
The deck guys said they contacted the super clear folks and they said just to clean and re-seal those areas… should I trust this or does anyone think this doesn't sound right?
Thanks for any advice here… I had my stampcrete porch sealed and there are white areas that came up right after it was dried.
Also a concrete repair was done the day before on the concrete porch and it was also sealed the day after the work was completed.
It was power washed and sealed the same day.
Was it done properly?
I have pictures also.
It could be trapped moisture under the sealer.
Try applying xylene solvent to those areas to restore the look.
I get bubbles up from the concrete every year so I have to put on a new coat every spring.
I just receintly poored a new floor in my garage and sealed it with two coats of Super Diamond Clear and was wondering about using an anti-slip agent.
It seems like this shouldn't be an issue I was just wondering what would be the best way to go about applying this?
I've heard I will have to loosen it up a little with xylene.
Now 3 yrs later 6 yrs ttl need to seal again.
At 3 it is basically gone.
Live in Dallas Texas and had an aggregate pool deck poured, what is the best sealer to use giving a wet look?
Will i need to add an anti slip agent being that it is super diamond clear vox />Is it easy enough for me to do myself.
Michael, I would look at the SuperSeal 30 and adding a ant slip will help with the pool area.
Yes you can easily do it yourself.
We Would Love to Hear From You!
Please post a review in the Consumer Star Ratings below each Article.
The Comment Area Below the Articles are for in-depth reviews and any questions you may have on each topic.
You may post pictures here as well.
Search Articles This is first and foremost a help site from our experience as concrete and brick paver restoration contractors.
All sealing and prepping manufacturer directions were followed with our reviews and ratings.
We offer no guarantee of similar results.
Take in consideration that results may differ due to prepping procedures, different surface types, different weather exposure, etc.
Super Diamond Clear TB. Super Diamond Clear Vox is a high solids acrylic, emulsion blend curing and sealing compound for freshly placed concrete. This product provides a quality cure and seal while assuring total resistance to yellowing from ultraviolet exposure. Primary Applications: Interior and exterior concrete ...